CPM-766 Charged Plate Monitor
-
Measures Decay and Balance (Offset Voltage) in accordance with ANSI/ESD STM3.1 and IEC 61340-4-7
-
Uses rechargeable Li-ion batteries
-
Up to 250 hours of battery life
-
Automated test sequences of tests
-
Selectable stop voltages for decay tests
-
Programmable delayed start option
-
Large color touchscreen LCD display
-
Built-in temperature and humidity sensor
-
Internal memory up to 200 data sets
-
Fast response time
-
Analog outout
-
NIST calibration included
PRS-801B Resistance System
-
Accurate Wide Range Resistance Measurements: 0.01 Ω to 2.00x1014 Ω
-
Accuracy of ±2% from 1.00 Ω to 9.99x1010Ω
-
Variable Voltage 0.1 mv to 9.99 V for low resistance measurements
-
Constant Test voltages 10V and 100V meeting ANSI/ESD S20.20
-
Auto Resistance Range Control
-
Auto Test Voltage Control
-
Uses a Rechargeable Li-ion Battery Pack
-
Takes Approximately 8,000 Measurements on a Single Charge (480 hours typical)
-
999 Data Set Memory
-
Download to Excel® in Batches or Individual Measurements with Prostat Connect 2.0
-
Uses Micro USB Cable for Charging and Downloading Data
-
Charges in 2 Hours
-
2-year Limited Warranty on Main Instrument
PRS-812B Resistance Meter
-
Wide Range Resistance: 0.10 Ω to 1.00x1012 Ω
-
Accuracy of ±2% from 1.00 Ω to 9.99x1010Ω
-
Constant Test voltages 10V and 100V for specification measurements to meet international and domestic ESD measurement standards
-
Auto Resistance Range Control
-
Auto Test Voltage Control
-
Uses a Rechargeable Li-ion Battery Pack
-
Takes Approximately 8,000 Measurements on a Single Charge (480 hours typical)
-
120 Data Set Internal Memory
-
Uses Standard USB Cable for Charging
-
Charges in 2 Hours
-
2-year Limited Warranty on Main Instrument
PAS-853B Wide Range Ohmmeter
-
Wide Resistance Measurement Range from 0.01 ohm to 9.99x1012 ohms
-
Nominal Full Range Tolerance Averages <±5%
-
Fully Automatic Resistance Range, Test Voltage and Electrification Period Control
-
Automatic or Continuous Electrification Control
-
Rugged High Performance 80 inches (200cm) Test Leads Included
-
Powered by one long lasting 9V Alkaline Battery
-
Large, Easy to Read LCD Display
-
Meets requirements of ESD Association Standards for material and audit resistance measurement requirements
-
Certificate of Calibration Traceable to NIST included
PFM-711B Electrostatic Field Meter
-
Lightweight, portable, hand-held Field Meter
-
Measure in 1 volt/in increments 0 to ±1,999 Volts
-
Measure in 10 V/in increments 0 to ±20,000 Volts
-
Accuracy of <±5%
-
LED ranging lights help position the meter at the right distance
-
Zero button allows the display to be adjusted to zero (0)
-
Hold feature freezes the measurement on the display
-
Use with Prostat CPM-720B Charge Plate Monitor and PCS-730B Electrostatic Charger
-
Use with Prostat PGA-710B AutoAnalysis System or X-Y Plotter
-
Analyze Footwear/Flooring Combinations
-
Verify Ionizer Balance and Decay Time Performance
-
2-year Limited Warranty (1 year on the sensor)
Surface Resistance per ANSI/ESD STM11.13
-
Measures volume resistance per ANSI/ESD STM11.13
-
Meets the requirements of IEC 61340-4-10
-
Measures Point-to-Point Surface Resistance from 0.9Ω to 1.0x1012Ω
-
Spacing Allows for Measurement Area of 0.325 inches (8.26mm)
-
Black Anodized Insulated Metal Probe
-
Gold Plated Spring Loaded Contact Pins
-
Removable Conductive Rubber Boots Included
-
Certificate of Calibration Traceable to NIST included
PRF-911 Concentric Ring
-
Measures surface resistance per ANSI/ESD STM11.11
-
Measures volume resistance per ANSI/ESD STM11.12
-
Meets the requirements of IEC 61340-2-3
-
Approximates surface & volume resistivity per ASTM D-257
-
Incorporates a spring loaded, self-aligning center electrode feature to reduce calibration frequency
-
Includes an insulated and metal dual test bed
-
Designed to work with a wide range resistance meter and one 5 lb. electrode
-
Certificate of calibration traceable to NIST included